Products » TLB Backhoe
Class 5 TLB Backhoe Attachments
For Backhoes 6.0-8.0 Metric Tons | 13,200-17,600 US lbs.
Standard attachment offerings for smaller TLB Backhoes. Other sizes are available. If you do not see the size you were looking for, please call ACS at 1-800-321-2348.
Manual Backhoe Couplers
Pick up any bucket or attachment built to OEM pin spacing and header geometry.
| Product | Weight (pounds) | ||
|---|---|---|---|
Manual Quick Coupler, Ping Grabber with Mounting Pins |
230 |
||
ACS does not make hydraulic couplers for Backhoes under 8.0 metric tons / 17,600 US lbs. Hydraulic couplers are available for Class 10 Backhoes (8.0+ Metric Tons and 17,600+ lbs) |
|||
Backhoe Heavy Duty Buckets
ACS Heavy Duty Backhoe Buckets are all-purpose buckets designed for rugged general excavation applications. They are heavier and more durable than the average OEM factory bucket and a good choice for those looking to upgrade to a long lasting bucket.
| Cut Width (over sides) | Capacity (cubic yards) | Number of Teeth | Weight (US pounds) |
|---|---|---|---|
18" |
0.25 |
3 |
420 |
24" |
0.32 |
4 |
570 |
30" |
0.41 |
5 |
630 |
| {product_options} | |||
Backhoe Ditch Clean-Out Buckets
ACS Ditch Clean-out Buckets are wider than general digging buckets and have a shorter tip radius to increase breakout force when reaching the excavator arm to it’s maximum distance.
| Cut Width (over sides) | Capacity (cubic yards) | Cutting Edge | Weight (US pounds) |
|---|---|---|---|
36" |
0.39 |
Bolt-On Edge |
585 |
48" |
0.52 |
Bolt-On Edge |
680 |
| {product_options} | |||
Backhoe Hydraulic Weld-On Thumb
Provides operators the efficiency of controlling thumb-travel from the cab with the added feature of a hydraulic cylinder.
| Teeth | Weight (pounds) | ||
|---|---|---|---|
2 |
425 |
||
| {product_options} | |||
Not compatible with coupler-equipped machines. Teeth are shipped loose and require field installation and custom length trimming to optimize lacing with existing bucket teeth. Shipping this way allows ACS to remove the cost of customization and provide a quality built thumb at significant savings.
Backhoe Stiff-Arm Weld-On Thumb
Rigid-link connection between the thumb body and stick. No hydraulics required. Manually adjustable to four positions, including one "stow-away" position.
| Teeth | Weight (pounds) | ||
|---|---|---|---|
2 |
425 |
||
| {product_options} | |||
Not compatible with coupler-equipped machines. Teeth are shipped loose and require field installation and custom length trimming to optimize lacing with existing bucket teeth. Shipping this way allows ACS to remove the cost of customization and provide a quality built thumb at significant savings.
