ACS Trash Grapple Buckets

These hard working trash grapple buckets are designed to re-handle light bulk materials up to 2,200 lbs. per cubic yard such as solid waste, refuse, leaves and brush ¹under normal conditions.

The grapple clamps are designed to allow the bucket to hold up to 50% more than rated capacity. Optional mesh grating is available for even greater material retention.

Drilled to accept ACS reversible bolt-on edges. Available in either pin-on or coupler-equipped configurations. Wheel loader requires third-function hydraulic circuit to actuate grapple cylinders. Attachment jumper hoses included.

Tech Specs

Wheel loader requires third-function hydraulic circuit to actuate grapple cylinders. Attachment jumper hoses included.

¹A Trash Grapple Bucket is not suitable for handling material in a harsh environment. An example of a harsh environment would be frozen woodchips or scrap aluminum on a concrete surface.

Common Applications

Designed to re-handle light bulk materials up to 2,200 lbs. per cubic yard.
  • Baled Refuse Handling
  • Debris Clean-Up
  • Disaster Cleanup
  • Land Clearing
  • Road Maintenance
  • Site Finishing
  • Solid Waste Handling
  • Utility Clean Up
Bucket Capacities and Weights
Bucket Capacity
Cubic Yards
Bucket Capacity With Grapple
Cubic Yards
Weight
US Pounds
Bucket capacities reflect SAE heaped standards, however, additional capacity is provided when installing a bolt on edge (BOE). All weights are approximate. Weights are estimated assuming no add-ons, options or payloads.
1.00 1.30 1,485
1.50 1.95 1,800
2.00 2.60 2,350
2.50 3.25 2,825
3.00 3.90 3,100
3.50 4.55 3,890
4.00 5.20 4,250
4.50 5.85 4,750
5.00 6.50 5,400
5.50 7.15 5,915
6.00 7.80 6,450
7.00 9.10 7,150
8.00 10.40 8,060

Options

  • Bolt-On Edge

    Bolt-On Edge Increase the lifespan of your bucket with a beveled, wear-resistant steel edge that takes the brunt of all first-contact impacts. Double-sided for twice extended life; when one side wears down, simply turn it around to expose the fresh edge. Weld-on AR 400 steel skid pads at bottom rear of bucket included. Factory painted and installed to match either ACS or OEM hole patterns.
  • Coupler Configurations

    Get your attachment configured to be pinned directly to the loader arms, work with a coupler you already own or buy your attachment as a package with one of our rugged hydraulic coupler choices below.

    • Pro Series 2000

      Compact Pro Series 2000 with vertical locking pins

      Our most advanced coupler design for the 4WD loader. The compact body balances strength with performance, keeping the payload close to the loader for the closest-in CG (center of gravity) in the industry. Features the ACS original single-point hookup design for fast, smooth coupling — even on uneven terrain.

      Learn More

    • Series 1000

      Rugged Series 1000 with horizontal locking pins

      Fully-supported legacy coupler system that established our reputation. Used in private and government fleets and highly regarded for its dependability — we still make it because you still demand it.

      Learn More

    • Other Coupling Systems

      ACS manufactures couplers that are fully compatible with all popular coupler systems:

  • Mesh Grating

    Mesh Grating Add additional retention control for handling smaller, lighter material by adding steel mesh grating to your grapple frames.

Pricing

Sign in or register to view pricing for this product, or call for a quote:

1-800-321-2348

Related Products

  • Trash Grapple Bucket

    Trash Grapple Bucket

    Re-handling cardboard at a recycling plant.

  • Trash Grapple Bucket

    Trash Grapple Bucket

    Re-handling cardboard at a recycling plant. Shown with optional mesh screen.

  • Trash Grapple Bucket

    Trash Grapple Bucket

  • Trash Grapple Bucket

    Trash Grapple Bucket

  • Trash Grapple Bucket

    Trash Grapple Bucket

Sign In

I forgot my username and/or password
or Cancel

Refer this page via email

Separate emails with a comma (",")