Features

Back to Top

Common Materials

A short list of materials commonly handled with the ACS Severe Duty Buckets:

  • Caliche
  • Coke
  • Concrete (recycled)
  • Dirt/Rock Mix
  • Gravel
  • Graveled Sand
  • Limestone (broken)
  • Loam
  • Shot Rock
  • Slag, Cold
  • Stone (crushed)
Lifting Eye

Lifting Eye

Patriot Buckets come with a sturdy Closed Loop Lifting Eye installed so you always have a place to tie into when you need to do some heavy lifting.

Heavy Wall Cross Tube

Heavy Wall Cross Tube

All ACS Excavator Buckets are built with Heavy Wall Cross Tube reinforcement across the top. This transfers breakout forces directly to the bucket cutting edge.

High Strength Steel

Heavy wear areas are constructed with premium-grade AR 400 steel for maximum impact and abrasion resistance. AR 400 steel has a minimum BNH (Brinell Hardness Number) of 360 and is valued for its durability and strong resistance to abrasion.

Single Radius Shell

Single Radius Shell

The sloped bottom, single-radius shell design provides superior loading and cleaning. The bottom of the bucket slopes up and away from the dig direction to facilitate boiling - the churning of material on a horizontal axis within the bucket which promotes faster loading with less required horsepower. The sloped bottom also reduces heel wear.

Trapezoidal Design

Trapezoidal Design

Tapered from front-to-back and bottom-to-top; keeping only the cutting edge in contact with handled material. This keeps the remaining surface area of the bucket from dragging, increasing the performance of your machine and reducing bucket wear.

Specifications

Back to Top
​Anti-Clatter Pin Boss

Anti-Clatter Pin Boss

Fabricated into the front bucket mounting pin location. Eliminates excess space between the machine stick and the bucket ears that can allow entry of abrasive material, creating loud “chatter” and increasing wear on the bucket ears and stick. The Anti-Clatter Pin Boss also allows for future adjustment and fine tuning as normal wear and metal erosion from side loading increase the gap.

Side Cutters

Side Cutters

The Installation of Side Cutters serves three purposes: 1) Protection. Prevents wear on the corner bit saving on down time & maintenance. 2) Provides additional cut width. Side Cutters flare out 1.5” on each corner of the bucket, providing an additional 3” to the cut width. This benefits trenching applications by allowing the bucket to cut wider than the bucket sides. 3) Side Drag Reduction. Side Cutters keep the sides of the bucket from dragging against the edge of the material trench, which increases productivity and decreases overall wear. When the Side Cutters have worn they can be easily removed and replaced.

Drainage Perforations

Provide fast escape routes for unwanted liquid in your payload.

Sizes

Excavator Size Cut Width Capacity Number of Teeth Weight
Class 10 24 in. 0.44 3 635 lbs
Class 10 30 in. 0.60 4 731 lbs
Class 10 36 in. 0.75 5 829 lbs
Class 15 Pin-On 24 in. 0.50 3 755 lbs
Class 15 Pin-On 30 in. 0.66 4 873 lbs
Class 15 Pin-On 36 in. 0.83 5 1,023 lbs
Class 15 Pin-On 42 in. 1.01 5 1,116 lbs
Class 20 Pin-On 24 in. 0.61 3 1,129 lbs
Class 20 Pin-On 30 in. 0.82 4 1,295 lbs
Class 20 Pin-On 36 in. 1.03 4 1,413 lbs
Class 20 Pin-On 42 in. 1.24 5 1,627 lbs
Class 20 Pin-On 48 in. 1.46 6 1,801 lbs
Class 25 Pin-On 30 in. 0.85 4 1,340 lbs
Class 25 Pin-On 36 in. 1.07 4 1,457 lbs
Class 25 Pin-On 42 in. 1.30 5 1,672 lbs
Class 25 Pin-On 48 in. 1.53 6 1,853 lbs
Class 25 Pin-On 54 in. 1.76 6 1,975 lbs
Class 30 Pin-On 36 in. 1.36 4 2,068 lbs
Class 30 Pin-On 42 in. 1.65 5 2,360 lbs
Class 30 Pin-On 48 in. 1.95 5 2,574 lbs
Class 30 Pin-On 54 in. 2.25 6 2,825 lbs
Class 30 Pin-On 60 in. 2.55 6 3,013 lbs
Class 40 Pin-On 36 in. 1.66 4 2,667 lbs
Class 40 Pin-On 42 in. 2.03 5 3,012 lbs
Class 40 Pin-On 48 in. 2.41 5 3,215 lbs
Class 40 Pin-On 54 in. 2.80 6 3,518 lbs
Class 40 Pin-On 60 in. 3.20 6 3,720 lbs
Class 40 Pin-On 66 in. 3.60 7 4,022 lbs
Class 50 Pin-On 36 in. 2.50 4 6,900 lbs
Class 50 Pin-On 42 in. 3.05 5 7,560 lbs
Class 50 Pin-On 48 in. 3.60 5 8,130 lbs
Class 50 Pin-On 54 in. 4.05 6 8,410 lbs
Class 50 Pin-On 60 in. 4.60 6 9,040 lbs

Get a Quote for this Attachment

Attachments available as direct-pin or quick coupler adapted. ACS will respond with pricing and current availability for this attachment.

Phone Icon
Main Phone
(330) 678-2511
Location
ACS Headquarters
2151 Mogadore Road
Kent, OH 44240
Map/Directions
Staff Directory

All ACS products are crafted by skilled American engineers, machinists and welders in the United States of America.

© 2018 ACS Industries, Inc

ACS Industries, Inc Asbury Mann Patriot
Close Contact Window

Contact ACS

Phone Icon
Main Phone
(330) 678-2511
Location
ACS Headquarters
2151 Mogadore Road
Kent, OH 44240
Map/Directions
Staff Directory